BP Mesh Coils

Pack of 5 genuine Aspire BP Replacement Coils

Compatible with the Aspire BP60 Pod Kit and BP80 Pod Kit

Coil Specifications

  • Genuine Aspire Coils
  • 5 Coils per pack

Coil Options

  • 0.3Ω (30-40 Watts)
  • 0.6Ω (15-25 Watts)
£12.99

Brand: Aspire

Weight 35.00 grams

Coil Type
Resistance
Quantity
In Stock.

Pack of 5 genuine Aspire BP Replacement Coils

Compatible with the Aspire BP60 Pod Kit and BP80 Pod Kit

  • Genuine Aspire Coils
  • 5 Coils per pack
  • 0.3Ω and 0.6Ω available

Sub-Ohm Coils

Important information about Sub Ohm Vaping:

Coils that are sub-ohm (Less than 1.0Ω) require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. Sub-ohm coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

Coil Options

  • 0.3Ω Meshed30-40W
  • 0.6Ω Kanthal15-25W

Coil Information

Please ensure that you prime your coil before using it.

To prime the coil, simply fit the coil, fill the tank and leave it approx 10 mins BEFORE pressing the power button.

If you have a larger coil with a top opening, you can also place a few drops on the inside of the coil. Doing this helps eliminate the chance of burning your new coil.

COILASP_BP5PK

You have a choice of delivery options.

Royal Mail 1st Class £1.99 Only available for small items for orders up to £30
Royal Mail (Sml Parcel) £3.99 For larger items and orders over £30
Courier £4.99 Next Working Day

Please note: We are closed on Sundays, therefore any orders placed after Saturday 2pm will be shipped out on Monday

Fitting your replacement coil.

  1. Turn off your ecigarette (This is to avoid accidentaly pressing the power button)
  2. remove the coil from the tank as per the tanks instructions
  3. insert the new coil into the tank and ensure it is tight in place
  4. re-assemble the tank
  5. fill with e-liquid up to the max line
  6. let the liquid soak into the coil for around 10 minutes or more - important!

You may want to try putting a few drops of e-liquid inside your coil before fitting it into the tank. This can speed up the priming process from the inside of the coil to help avoiding burning your new coil.

Make sure you do not put too much liquid inside the coil of you could end up flooding the coil.